Vent Encasement Assembly

The Vent Encasement Assembly is used wherever pressurized, inert gas lines are needed and in instances where a solid mount in the line of draw application is desired. This Vent Encasement Assembly significantly outlasts other vent tubes by virtually eliminating thread stripping in the tube. It is available in 1/2" diameter and is easily installed into the casting. Use insulated lines  to connect to your machine air or other compressed air source.

The Parting Line Vent Encasement Assembly is used when the vent must be situated on the parting line and pressurized inert gas lines are required. It possesses all of the advantages of our standard vent encasement, as well as the ability to lift out of the mold before being removed from the part. This easy to use assembly may be installed in any mold equipped with a parting line flange. It is available in 1/2" diameter.

Ordering Information
VEA-1200	1/2" Vent Encasement Assembly	$ 41.31	0.2 lbs.
VEA-3400	3/4" Vent Encasement Assembly	$ 41.31	0.2 lbs.
VE-1210	Vent Encasement	$ 11.95	0.1 lbs.
VT-1210	1/2" Teflon Vent Tube	$ 24.05	0.1 lbs.
VT-3410	3/4" Teflon Vent Tube	$ 24.00	0.1 lbs.
BE-9000	90 Degree Brass Elbow - 1/8 NPT to 1/4 NPT	$ 4.56	0.1 lbs.
Assy includes: 10-24 x 1/2" FHSCS (2 required), 1/4" x 1/8" NPT Hex Bushing
PVA-1200	1/2" P/L Vent Encasement Assembly	$ 68.6	0.2 lbs.
VC-1220	Vent Cradle	$ 19.65	0.1 lbs.
EC-1230	Vent Encasement Cap	$ 8.45	0.2 lbs.
Assy Includes: FH-120310-24 x 3/8" FHSCS (2 required), SH-1210 10-24 x 1" FHSCS (2 required), LW-1000 #10 S.S. Lock Washer (2 required), 1/4" x 1/8" NPT Hex Bushing

Vent Tubes & Teflon Tubing

Designed with a .030 Step....

...For Easy Release of Product From Vent Tube!

...Easier For Operators to Demold!

...Reduce Part Disfiguration and Warpage!

• For Use In The Line of Draw!
• Reduces Wear of Vent Tubes!
• Vent Tubes Cannot Fall Out!

Our stationary vent tubes eliminate the problems associated with removable vent tubes since they cannot fall out of the mold during the process cycle. For use in the line of draw, these tubes are easy to install and replace.

Ordering Information
SVA-1200	1/2" Stationary Vent Tube Assembly	$ 24.59	0.1 lbs.
SVA-3400	3/4" Stationary Vent Tube Assembly	$ 29.30	0.1 lbs.
SVA-1010	1" Stationary Vent Tube Assembly	$ 37.04	0.1 lbs.
SV-1210	1/2" Stationary Vent Tube	$ 15.45	0.1 lbs.
SV-3410	3/4" Stationary Vent Tube	$ 20.40	0.1 lbs.
SV-1010	1" Stationary Vent Tube	$ 27.85	0.1 lbs.
VR-1220	1/2" Vent Retainer	$ 8.90	0.1 lbs.
VR-3420	3/4" Vent Retainer	$ 8.65	0.1 lbs.
VR-1020	1" Vent Retainer	$ 8.95	0.1 lbs.
Assy includes: SH-1204 SHCS #10-24 x 1/2" (2 required), LW-1000 #10 S.S. Lock Washer (2 required)

ST-3810	3/8" Dia. Straight Vent Tube	$ 4.50	0.1 lbs.
ST-1210	1/2" Dia. Straight Vent Tube	$ 5.84	0.1 lbs.
ST-3410	3/4" Dia. Straight Vent Tube	$ 7.15	0.1 lbs.
ST-1010	1" Dia. Straight Vent Tube	$ 9.65	0.1 lbs.
TT-1200	Teflon Tubing 1/2" O.D. 3/8" I.D. per foot	$ 3.75	0.1 lbs.
TT-3400	Teflon Tubing 3/4" O.D. 1/2" I.D. per foot	$ 8.75	0.1 lbs.
TT-1000	Teflon Tubing 1" O.D. 3/4" I.D. per foot	$ 12.20	0.1 lbs.