J-Bolt Disengagement Guide

Lakeland Mold can add a disengagement guide (specify when ordering) to all J-bolts when 311 and 385M clamps are ordered on a spider. The disengagement guide steers the clamp's latch bar or U-bolt clear of the J-bolt when opening the mold/spider. It's a simple idea that makes the operator's job easier. The operator need only unlatch the clamp once and is assured that the spider is free and clear to open.

Replacement J-bolts are available for purchase with the disengagement guide welded on.

Replacement J-Bolts

AVAILABLE IN 4", 8" & 16" LENGTHS
THREADED THE LENGTH OF THE BOLT!

J-bolts, in conjunction with De-Sta-Co® pull style clamps, are used to achieve maximum clamping pressure. They are fully adjustable and are available with or without the disengagement guide welded on. The 1/2-13 size is available for use with #311 De-Sta-Co® clamps while the 5/8-11 size is to be used with the #385M De-Sta-Co® clamps.

Ordering Information
JBA-1208	J-Bolt Assembly 1/2-13 x 8	$ 8.95	1.39 lbs.
JBA-1216	J-Bolt Assembly 1/2-13 x 16	$ 10.75	1.5 lbs.
JBA-5808	J-Bolt Assembly 5/8-1 1 x8	$ 15.87	1.49 lbs.
JBA-5816	J-Bolt Assembly 5/8-1 1 x 16	$ 20.69	1.6 lbs.
JB-1208	J-Bolt 1/2-13 x 8	$ 2.75	0.65 lbs.
JB-1216	J-Bolt 1/2-13 x 16	$ 4.50	0.76 lbs.
JB-5808	J-Bolt 5/8-11 x8	$5.25	0.65 lbs.
JB-5816	J-BoltS/8-11 x16	$ 14.65	0.76 lbs.
JS-1200	J-Bolt Sleeve 1/2	$ 6.80	0.84 lbs.
JS-5800	J-BoIt Sleeve 5/8	$ 11.15	0.84 lbs.

Assy includes: HN-1213 1/2-13 Hex Nut (2 Req’d), HN-5811 5/8-11 Hex Nut (2 Req’d), LW-1200 1/2" Lock Washer (2 Req’d),  LW-5800  5/8" Lock Washer (2 Req’d)